Reference v4.1.0 Instruction Manual

848 Network OS Command Reference

53-1003115-01

show ip bgp routes longer-prefixes

Displays BGP4 route information that is filtered for a specific prefix and mask, as well as for

prefixes with a longer mask than the one specified.

Synopsis show ip bgp routes ip-addr/prefix [longer-prefixes | ip-addr] [rbridge-id rbridge-id]

Operands ip-addr IPv4 address in dotted-decimal notation.

prefix Mask length in CIDR notation.

longer-prefixes Filters on prefixes equal to or greater than that specified by the mask.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to view BGP4 route information for a specific prefix with a mask longer than or

equal to the mask specified in the command.

Usage Guidelines None

Examples To view BGP4 route information filtered by longer prefixes:

switch# show ip bgp routes 10.11.12.12/23 longer-prefixes