Reference v4.1.0 Instruction Manual

Network OS Command Reference 849
53-1003115-01
show ip bgp routes neighbor nexthop local unreachable
2
show ip bgp routes neighbor nexthop local unreachable
Displays BGP4 route information that is filtered by neighbor, next hop, and other options.
Synopsis show ip bgp routes [neighbor ip-addr | nexthop ip-addr | local | unreachable]
[rbridge-id rbridge-id]
Operands neighbor Displays only those routes that are received from the specified neighbor.
nexthop Displays only those routes that are received from the specified next hop.
ip-addr IPv4 address of neighbor or next hop, in dotted-decimal notation.
local Displays only those routes that use a Local AS.
unreachable Displays only those routes whose destinations are unreachable through any
of the BGP4 paths in the BGP4 route table.
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to view BGP4 route information that is filtered by neighbor, next hop, and other
options.
Usage Guidelines None
Examples To view BGP4 routes filtered by neighbor:
switch# show ip bgp routes neighbor 10.11.12.13
See Also None