Reference v4.1.0 Instruction Manual

854 Network OS Command Reference
53-1003115-01
show ip dhcp relay address rbridge-id
2
show ip dhcp relay address rbridge-id
Displays IP DHCP Relay addresses.
Synopsis show ip dhcp relay address rbridge-id rbridge-id | all | range
Operands rbridge-id Specific RBridge identification. You can specify multiple RBridge IDs,
separated by commas.
all All RBridge IDs in the logical chassis cluster.
range A range of RBridge IDs separated by a dashes or commas, for example:
1-3 - RBridge ID 1 through 3
1-3, 5 - RBridge ID 1 through 3 and RBridge ID 5
1, 3, 5, 6 - RBridge ID 1, 3, 5, and 6
Defaults If the rbridge-id parameter is omitted, IP DHCP Relay addresses display for the local switch.
Command Modes Privileged EXEC mode
Description Displays the IP address and Virtual Routing and Forwarding (VRF) name for all interfaces with
configured IP DHCP Relay addresses on a local switch, specific switches, or all switches in a VCS
Fabric cluster.
Usage Guidelines No spaces are allowed in the range string. The range does not need to be contiguous (for example,
1-2,5).
Examples To display addresses configured on a specific RBridge ID:
sw0# show ip dhcp relay address rbridge-id 2
Rbridge Id: 2
----------------
Interface Relay Address VRF Name
------------- ------------- ---------
Te 2/2/1 10.1.1.1 Blue
Te 2/4/2 20.1.1.1 Blue
Te 2/5/4 30.1.1.1 Default-vrf
Te 2/6/6 40.1.1.1 Green
To display addresses configured on all switches in a virtual fabric cluster:
sw0# show ip dhcp rel address rbridge-id all
Rbridge Id: 1
-------------
Interface Relay Address VRF Name
--------- ------------- --------
Te 1/0/24 2.3.4.5 default-vrf
Ve 300 10.0.1.2 default-vrf
Rbridge Id: 3
-------------
Interface Relay Address VRF Name
--------- ------------- --------
Ve 300 10.0.0.5 default-vrf