Reference v4.1.0 Instruction Manual

858 Network OS Command Reference
53-1003115-01
show ip igmp groups
2
show ip igmp groups
Displays information related to learned groups in the IGMP protocol module.
Synopsis show ip igmp groups [[[A.B.C.D [detail]] |rbridge-id {rbridge-id | all} | [interface
[fortygigabitethernet rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | ve [vlan_id | rbridge-id rbridge-id] [detail | A.B.C.D]] |
[interface vlan vlan_id | detail]| [interface port-channel number | detail]]]
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in
the multicast group.
detail Displays the IGMPv3 source information.
rbridge-id rbridge-id Specifies an RBridge. This is not valid in standalone mode.
all Displays all information.
interface Use this parameter to specify the interface.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the routing bridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the routing bridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface
rbridge-id Specifies the routing bridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies the virtual Ethernet (VE) interface. Refer to the Usage Guidelines.
detail Displays the IGMPv3 source information.
interface
Use this parameter to specify the interface.
vla
n vlan_id Specifies which VLAN interface to display the snooping configuration
related information. Refer to the Usage Guidelines.
detail Displays the IGMPv3 source information.
interface Use this parameter to specify the interface.