Reference v4.1.0 Instruction Manual

866 Network OS Command Reference
53-1003115-01
show ip interface
2
show ip interface
Displays the IP interface status and configuration of all interfaces or a specified interface.
Synopsis show ip interface [brief {rbridge-id rbridge-id | all}| fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | loopback number |port-channel number |
tengigabitethernet rbridge-id/slot/port |ve vlan_id]
Operands brief Specifies to display a brief summary of IP interface status and
configuration.
rbridge-id Specifies to display IP interface entries for a specific RBridge ID.
all Specifies to display IP interface entries for all RBridge IDs in the VCS
cluster.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
loopback number Specifies to display the loopback interface number. Valid values range from
1 through 255.
port-channel number Specifies to display the port-channel number. Valid values range from 1
through 6144.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies a virtual Ethernet (VE) interface (VLAN interface number). Refer to
the Usage Guidelines.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display IP interface status and configuration of all interfaces or a specified
interface.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.