Reference v4.1.0 Instruction Manual

Network OS Command Reference 873
53-1003115-01
show ip ospf area
2
all Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the OSPF area address table in the format you have chosen.
Usage Guidelines None
Examples
switch# show ip ospf area
Number of Areas is 4
Indx Area Type Cost SPFR ABR ASBR LSA Chksum(Hex)
1 10.0.0.0 normal 0 4 0 0 0 00000000
2 11.0.0.0 normal 0 3 0 0 0 00000000
3 4 nssa 120 0 0 0 0 00000000
4 6 stub 110 0 0 0 0 00000000
See Also None