Reference v4.1.0 Instruction Manual

Network OS Command Reference 875

53-1003115-01

show ip ospf config

Displays OSPF configuration.

Synopsis show ip ospf config [[vrf vrfname [rbridge-id {rbridge-id | all }]] | rbridge-id {rbridge-id | all }]

Operands vrf vrfname Specifies the name of the VRF instance. If this option is not used, details

for the default VRF are shown in the output.

rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces

specific to the selected RBridge.

all Displays the information for the physical, loopback, and SVI interfaces of all

nodes in the VCS cluster. There can be multiple loopbacks and SVIs with

the same RBridge ID from different nodes.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information about the OSPF configuration.

Usage Guidelines None

Examples

switch# show ip ospf config

Router OSPF: Enabled

Redistribution: Disabled

Default OSPF Metric: 10

OSPF Auto-cost Reference Bandwidth: Disabled

OSPF Redistribution Metric: Type2

OSPF External LSA Limit: 14913080

OSPF Database Overflow Interval: 0

RFC 1583 Compatibility: Enabled

Router id: 0.0.0.0

OSPF Area currently defined:

Area-ID Area-Type Cost

0 normal 0

1 normal 0

OSPF Area Range currently defined:

Area-ID Range-Address Subnetmask Status Config-Cost

1 20.0.0.0 255.0.0.0 advertise 100

1 30.0.0.0 255.0.0.0 not-advertise -