Reference v4.1.0 Instruction Manual

Network OS Command Reference 881
53-1003115-01
show ip ospf neighbor
2
show ip ospf neighbor
Displays neighbor information.
Synopsis show ip ospf neighbor [extensive] {fortygigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | loopback number | port-channel number |
router-id A.B.C.D | tengigabitethernet rbridge-id/slot/port | ve vlan_id} [[vrf vrfname [rbridge-id
{rbridge-id | all}]] | rbridge-id {rbridge-id | all}]
Operands extensive Shows detailed information about all neighbors.
fortygigabitethernet rbridge-id/slot/port
Show neighbor information for the specified, valid 40-gigabit Ethernet port
interface.
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Displays neighbor information for the specified, valid 1-gigabit Ethernet
interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
loopback number Specifies a loopback port number in the range from1 through 255.
port-channel number
Displays neighbor information for the specified, valid port-channel number.
Valid values range from 1 through 6144.
router-id A.B.C.D Displays neighbor information for the specified router ID (in dotted decimal
format).
tengigabitethernet rbridge-id/slot/port
Displays neighbor information for the specified, valid 10-gigabit Ethernet
interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
ve vlan_id Specifies a virtual Ethernet (VE) interface. Refer to the Usage Guidelines.
vrf vrfname Specifies the name of the VRF instance. If this option is not used, details
for the default VRF instance are shown in the output.
rbridge-id
rbridge-id Displa
ys the information for the physical, loopback, and SVI interfaces
specific to the selected RBridge.
all Displays the information for the physical, loopback, and SVI interfaces of all
nodes in the VCS cluster. There can be multiple loopbacks and SVIs with
the same RBridge ID from different nodes.