Reference v4.1.0 Instruction Manual

Network OS Command Reference 885

53-1003115-01

show ip ospf summary

Displays summary information for all OSPF instances.

Synopsis show ip ospf summary [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id {rbridge-id | all}]

Operands vrf vrfname Specifies the name of the VRF instance. If this option is not used, details

for the default VRF are shown in the output.

rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces

specific to the selected RBridge.

all Displays the information for the physical, loopback, and SVI interfaces of all

nodes in the VCS cluster. There can be multiple loopbacks and SVIs with

the same RBridge ID from different nodes.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display summary information for all OSPF instances.

Usage Guidelines None

Examples

switch# show ip ospf summary

Total number of OSPF instances: 1

Seq Instance Intfs Nbrs Nbrs-Full LSAs Routes

1 default-vrf 5 2 1 12 2

telnet@NetIron MLX-4 Router(config-ospf-router)#show ip ospf border-routers

router ID router type next hop router outgoing interface Area

1 1.0.0.1 ABR 22.22.22.2 2/2 7

1 1.0.0.2 ABR 22.22.22.2 2/2 7

1 1.0.0.1 ASBR 22.22.22.2 2/2 7

1 1.0.0.2 ASBR 22.22.22.2 2/2 7