Reference v4.1.0 Instruction Manual

Network OS Command Reference 887
53-1003115-01
show ip ospf traffic
2
Description Use this command to display details of OSPF traffic sent and received. You can display all traffic or
specify a particular interface.
Usage Guidelines If the physical interface type and name are specified, the rbridge-id option is not available.
On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point
of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs
are as follows:
• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963
through 4095 are reserved on these switches), and 4096 through 8191 for service or
transport VFs in a Virtual Fabrics context.
Examples To show all OSPF traffic:
switch# show ip ospf traffic
Packets Received Packets Sent
Hello 10 10
Database 90 89
LSA Req 12 11
LSA Upd 12 12
LSA Ack 12 12
No Packet Errors!
See Also None