Reference v4.1.0 Instruction Manual

ManualsBrandsBrocade ManualsComputer AccessoriesNetwork OS Command

921

922

923

924

925

926

927

928

929

930

888 Network OS Command Reference

53-1003115-01

show ip ospf virtual

Displays information about virtual links.

Synopsis show ip ospf virtual {link | neighbor} [index] [[vrf vrfname [rbridge-id {rbridge-id | all}]] | rbridge-id

{rbridge-id | all}]

Operands link index Shows information about all virtual links or one virtual link that you specify.

neighbor index Shows information about all virtual neighbors or one virtual neighbor that

you specify.

vrf vrfname Specifies the name of the VRF instance. If this option is not used, details

for the default VRF are shown in the output.

rbridge-id rbridge-id Displays the information for the physical, loopback, and SVI interfaces

specific to the selected RBridge.

all Displays the information for the physical, loopback, and SVI interfaces of all

nodes in the VCS cluster. There can be multiple loopbacks and SVIs with

the same RBridge ID from different nodes.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information about virtual links and virtual neighbors over virtual

links. You can show information about all virtual links or virtual neighbors, or you can specify a

specific virtual link or virtual neighbor.

Usage Guidelines None

Examples To show information about all virtual links:

switch# show ip ospf virtual link

Indx Transit Area Router ID Transit(sec) Retrans(sec) Hello(sec)

1 7 192.0.0.1 1 5 10

Dead(sec) events state Authentication-Key

40 0 down None

MD5 Authentication-Key: None

MD5 Authentication-Key-Id: None

MD5 Authentication-Key-Activation-Wait-Time: 300

To show information about all virtual neighbors:

switch# show ip ospf virtual neighbor