Reference v4.1.0 Instruction Manual

Network OS Command Reference 889
53-1003115-01
show ip pim bsr
2
show ip pim bsr
Displays the Boot Strap Router (BSR) information.
Synopsis show ip pim bsr [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the BSR information. The information displayed ignores whether the
Protocol Independent Multicast router is the elected BSR or not.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim bsr
PIMv2 Bootstrap information :
------------------------------------------------------------------
BSR address: 10.10.10.1. Hash Mask Length 32. Priority 0.
See Also router pim, show ip pim group, show ip pim neighbor, show ip pim rpf, show ip pim rp-hash,
show ip pim rp-map, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic