Reference v4.1.0 Instruction Manual

892 Network OS Command Reference
53-1003115-01
show ip pim neighbor
2
show ip pim neighbor
Displays the Protocol Independent Multicast (PIM) neighbor information.
Synopsis show ip pim neighbor [rbridge-id rbridge-id]
Operands rbridge-id rbridge-id Specifies the RBridge ID.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about all the neighbors that the PIM router perceives as
active.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim neighbor
Total Number of Neighbors : 43
Port Phy_Port Neighbor Holdtime Age UpTime Priority
sec sec Dd HH:MM:SS
Te 125/1/31 Te 125/1/31 125.31.1.1 105 0 00:29:30 1
Te 125/1/43 Te 125/1/43 125.49.43.2 105 20 00:29:30 1
Te 125/2/1 Te 125/2/1 125.2.1.2 105 10 00:29:40 1
Ve 2000 Ve 2000 10.1.1.5 105 0 00:27:00 1
Ve 2001 Ve 2001 21.1.1.3 105 0 00:27:00 1
Ve 2002 Ve 2002 22.1.1.131 105 0 00:27:00 1
See Also router pim, show ip pim bsr, show ip pim group, show ip pim rpf, show ip pim rp-hash,
show ip pim rp-map, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic