Reference v4.1.0 Instruction Manual

894 Network OS Command Reference
53-1003115-01
show ip pim rp-hash
2
show ip pim rp-hash
Displays the Rendezvous Point (RP) information for a Protocol Independent Multicast (PIM) sparse
group.
Synopsis show ip pim rp-hash A.B.C.D
Operands A.B.C.D Group address in dotted decimal format.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the RP information for a PIM sparse group. It displays all RPs for the
given group. The RP address could have been learned either from the Boot Strap Router (BSR) or
configured statically.
Usage Guidelines None
Examples A typical output for this command.
switch# show ip pim rp-hash 225.125.1.1
RP: 10.10.10.1, v2
See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,
show ip pim rp-map, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,
show ip pim traffic, show ip pim traffic