Reference v4.1.0 Instruction Manual

Network OS Command Reference 895

53-1003115-01

show ip pim rp-map

Displays the Rendezvous Point (RP) to group mappings.

Synopsis show ip pim rp-map [rbridge-id rbridge-id]

Operands rbridge-id rbridge-id Specifies the RBridge ID.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the RP to group mappings.

Usage Guidelines None

Examples A typical output for this command.

switch# show ip pim rp-map

Number of group-to-RP mappings: 6

Group address RP address

-------------------------------

1 239.255.163.1 99.99.99.5

2 239.255.163.2 99.99.99.5

3 239.255.163.3 99.99.99.5

4 239.255.162.1 99.99.99.5

5 239.255.162.2 43.43.43.1

6 239.255.162.3 99.99.99.5

See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,

show ip pim rp-hash, show ip pim rp-set, show ip pim-sparse, show ip pim traffic,

show ip pim traffic, show ip pim traffic