Reference v4.1.0 Instruction Manual

896 Network OS Command Reference

53-1003115-01

show ip pim rp-set

Displays the Rendezvous Point (RP) set list.

Synopsis show ip pim rp-set [rbridge-id rbridge-id]

Operands rbridge-id rbridge-id Specifies the RBridge ID.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information regarding all RPs that Protocol Independent

Multicast (PIM) perceives. The RPs may be either statically or dynamically learned.

Usage Guidelines None

Examples A typical output for this command.

switch# show ip pim rp-set

Static RP

---------

Static RP count: 1

RP: 22.22.22.22

Number of group prefixes Learnt from BSR: 1

Group prefix = 231.0.0.0/4 # RPs expected: 1

# RPs received: 1

RP 1: 33.33.33.33 priority=0 age=10 holdtime=150

switch#

See Also router pim, show ip pim bsr, show ip pim group, show ip pim neighbor, show ip pim rpf,

show ip pim rp-hash, show ip pim rp-map, show ip pim-sparse, show ip pim traffic,

show ip pim traffic, show ip pim traffic