Reference v4.1.0 Instruction Manual

900 Network OS Command Reference
53-1003115-01
show ip route
2
show ip route
Shows IP route information.
Synopsis show ip route
show ip route A.B.C.D/M [{debug | detail | longer}]
show ip route [all] [connected] [ospf] [bgp] [slot line_card_number] [static] [summary] [vrf name]
[rbridge-id rbridge-id]
show ip route nexthop [nexthopID [ref-routes]]
Operands A.B.C.D/M Specifies the IPv4 address/length to show information for a specific route.
debug Displays debug information.
detail Displays more-specific routes with the same specified prefix.
longer Displays routes with addresses that match the address/mask prefix.
rbridge-id Displays routes for a selected RBridge ID.
vrf Displays routes for a selected VRF instance.
all Displays information for all configured ip routes.
bgp Displays BGP route information.
connected Displays directly connected routes, such as local Layer 3 interfaces.
nexthop Displays information about the configured next hop.
nexthopID Valid values range from 0 through 65535.
ref-routes Displays all routes that point to the specified nexthopID.
ospf Displays routes learned from the Open Shortest Path First (OSPF) protocol.
rbridge-id rbridge-id Displays routes for a selected RBridge ID.
slot line_card_number
Displays information for routes with the provided line card number.
static Displays information about the configured static routes.
summary Displays summary information for all routes.
vrf name Displays routes for a selected VRF instance.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the IP routes in IP route management.
Usage Guidelines None
Examples
switch# show ip route
Total number of IP routes: 7
Type Codes - B:BGP D:Connected I:ISIS O:OSPF R:RIP S:Static; Cost - Dist/Metric
BGP Codes - i:iBGP e:eBGP
ISIS Codes - L1:Level-1 L2:Level-2
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 s:Sham Link