Reference v4.1.0 Instruction Manual

908 Network OS Command Reference
53-1003115-01
show license id
2
show license id
Displays the RBridge License ID.
Synopsis show license id [rbridge-id {rbridge-id |all}] [all]
Operands
rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on
individual nodes.
rbridge-id Specifies a unique identifier for a node.
all Specifies all identifiers for a node.
all Executes the command on all switches in the fabric.
Defaults Displays the license ID installed on the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display the RBridge license ID (WWN) for the specified switch. You need the
RBridge license ID when you prepare to add a license.
Usage Guidelines In the Network OS v3.0.0 release, this command is supported only on the local RBridge.
In logical chassis cluster mode, remote license operations may be performed on any remote
RBridge, from any RBridge in the logical chassis cluster.
Examples To display the license ID for the local switch:
switch# show license id
Rbridge-Id LicenseId
========================================
2 10:00:00:05:1E:00:4C:80
See Also license add, license remove, show license