Reference v4.1.0 Instruction Manual

Network OS Command Reference 911

53-1003115-01

show lldp interface

Displays the LLDP status on the specified interface.

Synopsis show lldp interface [tengigabitethernet rbridge-id/slot/port | gigabitethernet rbridge-id/slot/port]

Operands tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the LLDP status on the specified interface.

Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,

Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.

Examples To display all the LLDP interface information for a selected interface:

switch# show lldp interface tengigabitethernet 1/0/0

LLDP information for Te 1/0/0

State: Enabled

Mode: Receive/Transmit

Advertise Transmitted: 30 seconds

Hold time for advertise: 120 seconds

Re-init Delay Timer: 2 seconds

Tx Delay Timer: 1 seconds tengigabitethernet

DCBX Version : CEE

Auto-Sense : Yes

Transmit TLVs: Chassis ID Port ID

TTL IEEE DCBX

DCBX FCoE App DCBX FCoE Logical Link

Link Prim Brocade Link

DCBX FCoE Priority Bits: 0x8