Reference v4.1.0 Instruction Manual

912 Network OS Command Reference
53-1003115-01
show lldp neighbors
2
show lldp neighbors
Displays LLDP information for all neighboring devices on the specified interface.
Synopsis show lldp neighbors [interface {tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port} detail]
Operands interface Specifies an Ethernet interface.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
detail Displays all the LLDP neighbor information in detail for the specified
interface.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display LLDP information for all neighboring devices on the specified
interface.
ATTENTION
If you do not use the interface parameter, only the mandatory TLVs are displayed.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display detailed LLDP neighbor information on a specific interface:
switch# show lldp neighbors interface tengigabitethernet 3/0/8 detail
Neighbors for Interface Te 3/0/8
MANDATORY TLVs
===============
Local Interface: Te 0/8 Remote Interface: Te 3/0/8 (IF Name)
Dead Interval: 120 secs Remaining Life : 100 secs Tx: 536 Rx: 535
Chassis ID: 0005.1e76.1020 (MAC)
Remote Mac: 0005.1e76.102c
OPTIONAL TLVs
==============
Port Interface Description: Te 3/0/8
System Name: sw0