Reference v4.1.0 Instruction Manual

914 Network OS Command Reference

53-1003115-01

show lldp statistics

Displays the LLDP statistics on all interfaces or a specified interface.

Synopsis show lldp statistics [interface {tengigabitethernet rbridge-id/slot/port |

gigabitethernet rbridge-id/slot/port}]

Operands interface Specifies an Ethernet interface.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display LLDP statistics on all interfaces or a specified interface.

If you do not specify an interface, Use this command to display the LLDP statistics for all

interfaces.

Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710, Brocade

VDX 8770-4, and Brocade VDX 8770-8 switches.

Examples To display LLDP statistics on the specified interface:

switch# show lldp statistics interface tengigabitethernet 5/0/8

LLDP Interface statistics for Te 5/0/8

Frames transmitted: 555

Frames Aged out: 0

Frames Discarded: 0

Frames with Error: 0

Frames Recieved: 554

TLVs discarded: 0

TLVs unrecognized: 0