Reference v4.1.0 Instruction Manual

Network OS Command Reference 915
53-1003115-01
show logging auditlog
2
show logging auditlog
Displays the internal audit log buffer of the switch.
Synopsis show logging auditlog [reverse] [rbridge-id rbridge-id | all]
Operands reverse Displays the audit log in reverse order.
rbridge-id Executes the command on the specified switch.
rbridge-id Specifies the RBridge ID for the switch.
all Executes the command on all switches in the fabric.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the audit log messages stored in the system.
Usage Guidelines This command is supported only on the local switch.
Examples To display the audit log messages stored in the internal buffer:
switch# show logging auditlog
0 AUDIT,2012/04/13-02:35:59 (GMT), [DCM-2002], INFO, DCMCFG,
admin/admin/10.72.16.41/ssh/cli,, chassis, Event: noscli exit, Status: success,
Info: Successful logout by user [admin].
1 AUDIT,2012/04/13-02:43:23 (GMT), [DCM-2001], INFO, DCMCFG,
admin/admin/10.72.16.41/ssh/cli,, chassis, Event: noscli start, Status: success,
Info: Successful login attempt through ssh from 10.72.16.41.
See Also clear logging raslog, clear logging auditlog, log-dampening-debug (BGP)