Reference v4.1.0 Instruction Manual

916 Network OS Command Reference

53-1003115-01

show logging raslog

Displays the internal RASlog buffer of the switch.

Synopsis show logging raslog [attribute attribute] [blade blade] [count count] [message-type type] [reverse]

[severity severity] [rbridge-id rbridge-id]

Operands attribute attribute Filters output by message attribute. Valid attributes include FFDC and VCS.

blade blade Displays for the specified blade only. Valid values for blade include MM1,

MM2, and LC[1-8].

count count Specifies the number of messages to display.

message-type type Filters the output by message type. Valid message types include DCE or

SYSTEM.

severity severity Filters the output by message severity. Valid severity levels include the

following: critical, error, info, and warning.

reverse Displays the messages in reverse order.

rbridge-id rbridge-id Executes the command on the specified switch.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the RASLog messages stored in the system. Use the filters to

customize the output.

Usage Guidelines This command is supported only on the local switch.

The RASLog messages contain the module name, error code, and message details.

Examples To display all RASLog messages stored in the system:

switch# show logging raslog

NOS: 3.0.0

2012/05/25-17:37:15, [LOG-1003], 1, M1, INFO, VDX8770-4, SYSTEM error log has

been cleared

2012/05/25-17:38:32, [SEC-1203], 3, M1, INFO, sw0, Login information: Login

successful via TELNET/SSH/RSH. IP Addr: 10.24.65.24

2012/05/25-17:42:54, [SEC-1203], 4, M1, INFO, sw0, Login information: Login

successful via TELNET/SSH/RSH. IP Addr: 10.24.65.24

2012/05/25-17:43:12, [IPAD-1002], 5, M1, INFO, VDX8770-4, Switch name has been

successfully changed to dutA1-sw0.

2012/05/25-17:51:42, [FW-1439], 180, M1, WARNING, dutA1-sw0, Switch status change

contributing factor Switch offline.

(output truncated)