Reference v4.1.0 Instruction Manual

922 Network OS Command Reference
53-1003115-01
show media interface
2
show media interface
Displays the SFP information for a specific interface.
Synopsis show media interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | fibrechannel rbridge-id/slot/port]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid external 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid external 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
fibrechannel rbridge-id/slot/port
Specifies a valid external 1-gigabit FibreChannel interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display a summary of the SFP information for the specified interface.
Usage Guidelines The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
The fibrechannel rbridge-id/slot/port parameter is used only on Brocade VDX 6730 switches.
Examples To display SPF information for a 1-gigabit Ethernet interface:
switch# show media interface gigabitethernet 1/0/1
Interface Gigabit Ethernet 0/1
Identifier 2 On-board
Connector 34 CAT-5 copper cable
Transceiver 1000 BASE-T Gigabit Ethernet
Name cu
Encoding 5 IEEE 802.3ab
Length max 100 m
Copper Speed 1GB/s Fixed
Copper Duplex Full Duplex
Sync status Valid/No
Vendor Name Broadcom
Vendor OUI 00:1B:E9
Vendor model 02:0F