Reference v4.1.0 Instruction Manual

Network OS Command Reference 925
53-1003115-01
show media linecard
2
show media linecard
Displays the SFP information for a specified interface module.
Synopsis show media linecard number
Operands number Numeric identifier for the interface module.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display a summary of small form-factor pluggable (SFP) and Quad SFP media
information for each interface on the specified module.
Usage Guidelines This command is supported only on the local RBridge.
Examples To display the SFP media information for an LC48X10G interface module in slot 2:
switch# show media linecard 2
Interface Ten Gigabit Ethernet 1/2/1
Identifier 3 SFP
Connector 33 Copper Pigtail
Transceiver d580884104000002 10_GB/s TW Short_dist
Name cu
Encoding 0
Baud Rate 103 (units 100 megabaud)
Length 9u 0 (units km)
Length 9u 0 (units 100 meters)
Length 50u 0 (units 10 meters)
Length 62.5u 0 (units 10 meters)
Length Cu 1 (units 1 meter)
Vendor Name BROCADE
Vendor OUI 00:05:1e
Vendor PN 58-1000026-01
Vendor Rev A
Wavelength 3072(units nm)
Options 0012
BR Max 0
BR Min 0
Serial No CAMB110100607EW
Date Code 110111
Optical Monitor No
Temperature N/A
Voltage N/A
Current N/A
TX Power N/A
RX Power N/A
(output truncated)
To display the Quad SFP media information for an LC12X40G interface module in slot 3:
switch# show media linecard 3
Interface fortygigabitethernet 1/3/2
Identifier 13 QSFP
Connector 12
Transceiver 0000000000000004 40_GB/s Short_dist
Name sw
Encoding 5 IEEE 802.3ab