Reference v4.1.0 Instruction Manual

932 Network OS Command Reference

53-1003115-01

show name-server nodefind

Displays the local name server (NS) information for a specific device.

Synopsis show name-server nodefind {PID pid | WWN wwn}

Operands PID pid Specifies the Fibre Channel address of the device to search for.

WWN wwn Specifies the World Wide Name (WWN) of the device to search for.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display local name server (NS) information about a specific detailed entry.

The lookup is performed using either the Fibre Channel address (Port ID, or PID), or the WWN of

the device. If no information is available for the device, the command displays one of the following

messages:

• For PID lookup: Device with PID of pid does not exist

• For WWN lookup: Device with WWN of wwn does not exist

Refer to show name-server detail for descriptions of the displayed information.

Usage Guidelines None

Examples To view name server information for a device specified by PID:

switch# show name-server nodefind pid 0x012100

PID: 012100

Port Name: 10:00:00:05:1E:ED:95:38

Node Name: 20:00:00:05:1E:ED:95:38

SCR: 3

FC4s: FCP

PortSymb: [27] "Brocade-1020|2.3.0.0|localhost.localdomain|Red Hat

Enterprise Linux Server release 5.5"

NodeSymb: NULL

Fabric Port Name: 20:21:00:05:1E:CD:79:7A

Permanent Port Name: 10:00:00:05:1E:ED:95:38

Device type: Physical Initiator

Interface: Fcoe 1/1/9

Physical Interface: Te 1/0/9

Share Area: No

Redirect: No

See Also show name-server brief, show name-server detail