Reference v4.1.0 Instruction Manual

Network OS Command Reference 943

53-1003115-01

show ntp status

Displays the current active NTP server IP address or LOCL (for local switch time when no NTP

servers were configured or no reachable NTP servers are available).

Synopsis show ntp status [rbridge-id {rbridge-id | all}]

Operands rbridge-id Specifies one or all RBridge IDs.

rbridge-id Specifies the RBridge ID on which the NTP server status displays.

all Specifies all switches in the VCS cluster.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the active NTP server. If an NTP server is not configured, the

command output displays the server as “LOCL”. Otherwise, the command displays the NTP server

IP address.

Usage Guidelines If the RBridge ID is not provided, status results default to the local switch (LOCL). If rbridge-id all is

specified, the command displays the status for all switches in the cluster.

Examples To show the local switch NTP status when an NTP server is not configured:

switch# show ntp status

rbridge-id 1: active ntp server is LOCL

To show the configured NTP server:

switch# show ntp status

active ntp server is 10.31.2.81