Reference v4.1.0 Instruction Manual

948 Network OS Command Reference
53-1003115-01
show port-channel
2
show port-channel
Displays the Link Aggregation Group (LAG) information for a port-channel.
Synopsis show port-channel [channel-group-number | detail | load-balance | summary]
Operands channel-group-number
Specifies a LAG port channel-group number to display. The number of
available channels range from 1 through 63 for standalone mode, and from
1 through 6144 for Brocade VCS Fabric mode. However, the channel can be
assigned any number from 1 through 6144.
detail Displays detailed LAG information for a port-channel.
load-balance Displays the load-balance or frame-distribution scheme among ports in the
port-channel.
summary Displays the summary information per channel-group.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the LAGs present on the system with details about the LACP counters
on their member links. LAG interfaces are called port-channels.
Usage Guidelines If you do not specify a port-channel, all port-channels are displayed.
When using the show port-channel channel-group-number command, an asterisk in the command
output designates that the designated port channel is the primary link through which the BUM
(Broadcast, Unknown unicast and Multicast) traffic flows.
Examples To display detailed port-channel information:
switch# show port-channel detail
LACP Aggregator: Po 10 (vLAG)(Defaulted)
Aggregator type: Standard
Ignore-split is enabled
Member rbridges:
rbridge-id: 1 (2)
rbridge-id: 2 (1)
Actor System ID - 0x8000,01-e0-52-00-00-01
Admin Key: 0010 - Oper Key 0010
Receive link count: 1 - Transmit link count: 1
Individual: 0 - Ready: 1
Partner System ID - 0x8000,00-05-1e-cd-0f-ea
Partner Oper Key 0010
Member ports on rbridge-id 2:
Link: Te 2/0/7 (0x218038006) sync: 1
See Also None