Reference v4.1.0 Instruction Manual

Network OS Command Reference 959
53-1003115-01
show process cpu
2
show process cpu
Displays information about the active processes in the switch and their corresponding CPU
utilization statistics.
Synopsis show process cpu [rbridge-id {rbridge-id | all}] [summary] [history] [top]
Operands rbridge-id Executes the command on the specified switches. Valid completions for
rbridge-id include the following:
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode,
and is supported only for the local RBridge ID.
all Specifies all switches in the fabric.
summary Displays a summary view of cpu usage.
history Displays the history of CPU usage.
top Displays current CPU utilization.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the active processes in the switch and their
corresponding CPU utilization statistics.
Usage Guidelines This command is supported only on the local switch.
For an explanation of process states, refer to the UNIX manual page for the ps command.
Examples To show the information for all processes:
switch# show process cpu summary
Realtime Statistics:
Total CPU Utilization: 0% (user procs:0%, system-kernel:0%, iowait:0%)
Load Average: One minute: 0.00; Five minutes: 0.03; Fifteen minutes: 0.01
To show CPU usage information by individual processes:
switch# show process cpu
Realtime Statistics:
Total CPU Utilization: 0% (user procs:0%, system-kernel:0%, iowait:0%)
Load Average: One minute: 0.00; Five minutes: 0.02; Fifteen minutes: 0.00
Active Processes Lifetime Statistic:
PID Process CPU% State Started
17169 sh 1.00 S 13:44:27 Jul 1, 2012
2060 emd 0.80 S 21:52:27 Jun 29, 2012
2462 SWITCH_TMR_0 0.60 S 21:53:08 Jun 29, 2012
17170 imishow_proc_cp 0.50 S 13:44:27 Jul 1, 2012
2207 ospfd 0.20 S 21:52:41 Jun 29, 2012
2211 mstpd 0.20 S 21:52:41 Jun 29, 2012
2208 rtmd 0.10 S 21:52:41 Jun 29, 2012
(output truncated)
See Also show process memory, show process info