Administrator's Guide v4.1.1 Manual

Exists PID
in Fabric
--------------------------------------------
75 10:00:00:00:c9:2b:c9:0c c70000
2 50:05:07:61:00:49:20:b4 0100ef
2 50:05:07:61:00:5b:62:ed 0100e8
Total devices displayed: 3
The fcrProxyDevShow command shows the proxy devices in the LSAN.
switch:admin> fcrproxydevshow
Proxy WWN Proxy Device Physical State
Created PID Exists PID
in Fabric in Fabric
-----------------------------------------------------------------------
75 50:05:07:61:00:5b:62:ed 01f001 2 0100e8 Imported
2 10:00:00:00:c9:2b:c9:0c 02f000 75 c70000 Imported
Total devices displayed: 2
On the FC router, the host and Target A are imported, because both are defined by
lsan_zone_fabric_02 and lsan_zone_fabric_01. However, target B is defined by
lsan_zone_fabric_02 and is not imported because lsan_zone_fabric_01 does not allow it.
Administering Zones
198 Network OS Administrator’s Guide
53-1003225-04