Administrator's Guide v4.1.1 Manual

Additional commands
Most of the VXLAN-gateway-related commands were used in the configuration example in the section
VXLAN Gateway configuration steps on page 371. For complete information on the those commands
as well as other VXLAN gateway commands and commands related to nsx-controller, refer to the
Network OS Command Reference.
Some additional commands you may want to use include the following:
• show nsx controller—Displays connection status for the NSX controller. Includes an option to
display the gateway certificate that is needed for NSX "transport node" configuration.
• show overlay-gateway—Displays status and statistics for the VXLAN gateway instance.
• clear overlay-gateway—Clears counters for the specified gateway.
• show tunnel—Displays statistics for tunnels.
Additional commands
374 Network OS Administrator’s Guide
53-1003225-04