Configuration Guide Manual

Brocade TurboIron 24X Series Configuration Guide 981
53-1003053-01
Sample 802.1X configurations
TurboIron(config)#interface e 3
TurboIron(config-if-e10000-3)#dot1x port-control auto
TurboIron(config-if-e10000-3)#exit
Hub configuration
Figure 121 illustrates a configuration where three 802.1X-enabled Clients are connected to a hub,
which is connected to a port on the device. The configuration is similar to that in Figure 120,
except that 802.1X port security is enabled on only one port, and the multiple-hosts command is
used to allow multiple Clients on the port.
FIGURE 121 Sample 802.1X configuration using a hub