Configuration Guide Manual

1064 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Syslog messages
Notification OSPF intf config error, rid <router-id>,
intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
error type <error-type>, pkt type <pkt-type>
Indicates that an OSPF interface
configuration error has occurred.
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <src-ip-addr> is the IP address of the
interface from which the device received
the error packet.
The <error-type> can be one of the
following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The <packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Notification OSPF intf rcvd bad pkt, rid <router-id>,
intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type>
Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <src-ip-addr> is the IP address of the
interface from which the device received
the authentication failure.
The <packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation