Configuration Guide Manual

1076 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
RFC support
NOTE
Some devices support only a subset of the RFCs. For example, Layer 2 Switches do not support
router-specific RFCs. For a list of features supported on your device, refer to the data sheet or the
software release notes for the version of software running on your device.
TABLE 178 Brocade RFC support
RFC number Protocol or Standard
TurboIron X Series
768 User Datagram Protocol (UDP) Yes
783 Trivial File Transfer Protocol (TFTP) Yes
791 Internet Protocol (IP) Yes
792 Internet Control Message Protocol (ICMP) Yes
793 Transmission Control Protocol (TCP) Yes
826 Ethernet Address Resolution Protocol
(ARP)
Yes
854, 855,
and 857
Telnet Yes
894 IP over Ethernet frames Yes
903 Reverse ARP (RARP) Yes
906 Bootstrap loading using TFTP Yes
919 Broadcast Internet datagrams Yes
920 Domain requirements Yes
922 Broadcast Internet datagrams in the
presence of subnets
Yes
950 Internet standard subnetting procedure Yes
951 Bootstrap Protocol (BootP) Yes
1027 Proxy ARP Yes
1042 IP datagrams over IEEE 802 networks (for
Ethernet)
Yes
1112 Internet Gateway Management Protocol
(IGMP) version 1
Yes
1155 Structure and Identification of
Management Information (SMI)
Yes
1157 Simple Network Management Protocol
(SNMP) version 1
Yes
1191 Path MTU Discovery No
1212 Concise MIB Definitions Yes
1213 MIB II Definitions Yes
1215 SNMP generic traps Yes
1340 Assigned numbers (where applicable) Yes
1398 Ethernet-Like MIB Yes
1492 An Access Control Protocol, Sometimes
Called TACACS
Yes