Configuration Guide Manual

Brocade TurboIron 24X Series Configuration Guide 253
53-1003053-01
Configuring a utilization list for an uplink port
In the following example, ports 2 and 3 are in the same port-based VLAN.
TurboIron#show relative-utilization 1
uplink: ethe 1
30-sec total uplink packet count = 3011
packet count ratio (%)
2:100 3:100
Here is another example showing different data for the same link utilization list. In this example,
port 2 is connected to a hub and is sending traffic to port 1. Port 3 is unconnected.
TurboIron#show relative-utilization 1
uplink: ethe 1
30-sec total uplink packet count = 2996
packet count ratio (%)
2:100 3:---