Configuration Guide Manual

2 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Supported features
Supported security features
Table 4 lists the supported security features. These features are supported in the Layer 2 software
images.
Combined DSCP and internal marking in
one ACL rule
Yes
Disabling TFTP Access Yes
Brocade Network Advisor Yes
P-Bridge and Q-Bridge MIBs Yes
Remote monitoring (RMON) Yes
sFlow:
• For inbound traffic only
• 802.1X username export support
for encrypted and non-encrypted
EAP types
Yes
Serial and Telnet access to
industry-standard Command Line
Interface (CLI)
Yes
Show log on all terminals Yes
SNMP v1, v2, v3 Yes
SNMP V3 traps Yes
Specifying the maximum number of
entries allowed in the RMON Control
Table
Yes
Traffic counters for outbound traffic Yes
TABLE 4 Supported security features
Category, description, and configuration
notes
TurboIron X Series
802.1X port security Yes
802.1X authentication RADIUS timeout
action
Yes
802.1X dynamic assignment for ACL,
MAC filter, and VLAN
Yes
Access Control Lists (ACLs) for filtering
transit traffic:
• Support for inbound ACLs only.
These devices do not support
outbound ACLs.
Yes
AES Encryption for SNMP v3 Yes
AES Encryption for SSH v2 Yes
TABLE 3 Supported management features (Continued)
Category, description, and configuration
notes
TurboIron X Series