Configuration Guide Manual
6 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Supported features
802.1s Multiple Spanning Tree Yes
802.1W Rapid Spanning Tree (RSTP):
• 802.1W RSTP support allows for
sub-second convergence (both final
standard and draft 3 supported)
Yes
802.3ad link aggregation (dynamic trunk
groups):
• TurboIron X Series ports enabled for
link aggregation follow the same
rules as ports configured for trunk
groups. Refer to “Trunk group rules”
on page 333.
Yes
ACL-based rate limiting QoS Yes
BPDU Guard Yes
Dynamic Host Configuration Protocol
(DHCP) Assist
Yes
IGMP v1/v2 Snooping Global Yes
IGMP v3 Snooping Global Yes
(*,G and S,G)
IGMP v1/v2/v3 Snooping per VLAN Yes
IGMP v2/v3 Fast Leave (membership
tracking)
Yes
Interpacket Gap (IPG) adjustment Yes
Jumbo frames:
• 1 Gbps and 10 Gbps Ethernet ports
• Up to 9216 bytes
Yes
Jumbo frames 10/100 support :
• Up to 10240 bytes
Yes
LACP:
• LACP trunk group ports follow the
same configuration rules as for
statically configured trunk group
ports.
• Support for single link LACP
Yes
Link Fault Signaling (LFS) for 10 Gbps
Ethernet ports
Yes
Metro Ring Protocol 1 (MRP 1) Yes
Metro Ring Protocol 2 (MRP 2)
TurboIron X Series devices support Alarm
RHP
Yes
PIM-SM V2 Snooping Yes
PVST/PVST+ compatibility Yes
TABLE 6 Supported Layer 2 features (Continued)
Category, description, and configuration
notes
TurboIron X Series