Configuration Guide Manual

Brocade TurboIron 24X Series Configuration Guide 7
53-1003053-01
Supported features
Supported Layer 3 features on TurboIron X Series devices
• ECMP
• RIP V1 and V2 (advertising only): Static RIP support only. The TurboIron X Series does not learn
RIP routes from other Layer 3 devices. However, the device does advertise directly connected
routes.
• Routing for directly connected IP subnets
• Static IP routing:
• Virtual Interfaces: Up to 255 virtual interfaces
• VRRP
PVRST+ compatibility Yes
Root Guard Yes
Super Aggregated VLANs Yes
Trunk groups:
• Trunk threshold for static trunk
groups
• Flexible trunk group membership
Yes
Topology groups Yes
Uni-directional Link Detection (UDLD)
(Link keepalive)
Yes
Uplink Ports Within a Port-Based VLAN Yes
VLAN Support:
• 802.1Q with tagging Yes
• Dual-mode VLANs Yes
• Protocol VLANs (AppleTalk, IPv4,
and IPX)
Yes
• VLAN groups Yes
• Private VLANs Yes
VLAN Q-in-Q Tagging (tag-type 8100 over
8100 encapsulation)
Yes
VLAN-based mirroring No
Virtual Switch Redundancy Protocol
(VSRP)
Yes
VSRP-Aware security features Yes
VSRP and MRP signaling Yes
VSRP Fast Start Yes
VSRP timer scaling Yes
TABLE 6 Supported Layer 2 features (Continued)
Category, description, and configuration
notes
TurboIron X Series