Configuration Guide Manual

8 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Supported IPv6 management features
OSPF V2 (IPv4)
Route-only support (Global and interface configuration levels )
VRRP
Anycast RP
IGMP V1, V2, and V3 (for multicast routing scenarios)
IP multicast routing protocols (PIM-SM, PIM-DM): TurboIron X Series devices support PIM-SM
and PIM-DM
ICMP Redirect messages
Multiprotocol Source Discovery Protocol (MSDP)
Route-only support:
Disabling Layer 2 Switching at the CLI Interface level as well as the Global CONFIG level.
This feature is not supported on virtual interfaces
VRRP-E
DHCP relay
IP helper
Supported IPv6 management features
Table 7 shows the IPV6 management features that are supported for TurboIron X Series devices
that can be configured as IPv6 hosts in an IPv6 network.
TABLE 7 Supported IPv6 management features
Category, description, and
configuration notes
TurboIron X Series
Link-Local IPv6 Address Yes
IPv6 copy Yes
IPv6 ncopy Yes
IPv6 debug Yes
IPv6 ping Yes
IPv6 traceroute Yes
DNS server name resolution Yes
Logging (Syslog) Yes
RADIUS Yes
SCP Yes
SSH Yes
SNMP v1, v2, v3 Yes
SNTP Yes
Syslog Yes
TACACS/TACACS+ Yes