Configuration Guide Manual

Brocade TurboIron 24X Series Configuration Guide 431
53-1003053-01
MAC filter-based mirroring
1. Configure the mirror port.
TurboIron(config)#mirror-port ethernet 2
2. Configure the MAC filter inbound mirror clause.
TurboIron(config)#mac filter 1 permit 0000.0000.0010 ffff.ffff.ffff any mirror
3. Apply the MAC filter inbound mirror clause to the monitor port.
TurboIron(config)#int e 5
TurboIron(config-if-e10000-5)#mac filter-group 1
4. Configure the monitor port to use the mirror port.
TurboIron(config-if-e10000-5)#acl-mirror-port ethernet 2
To display ACL mirror settings, enter the show access-list all command.
TurboIron#show access-list all
Extended IP access list 101
permit ip any any mirror