Configuration Guide Manual
848 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Multicast Source Discovery Protocol (MSDP)
Displaying source active cache information
To display the Source Actives in the MSDP cache, use the following CLI method.
Syntax: show ip msdp sa-cache
This display shows the following information.
Clearing MSDP information
You can clear the following MSDP information:
• Peer information
• Source Active cache
• MSDP statistics
RcvQue The number of sequence numbers in the receive queue.
SendQue The number of sequence numbers in the send queue.
TABLE 131 MSDP source active cache
This field... Displays...
Total Entry The total number of entries the cache can hold.
Used The number of entries the cache currently contains.
Free The number of additional entries for which the cache has room.
Index The cache entry number.
SourceAddr The IP address of the multicast source.
GroupAddr The IP multicast group to which the source is sending information.
RP The RP through which receivers can access the group traffic from the source
Age The number of seconds the entry has been in the cache
TABLE 130 MSDP peer information (Continued)
This field... Displays...
TurboIron(config-msdp-router)#show ip msdp sa-cache
Total Entry 4096, Used 1800 Free 2296
Index SourceAddr GroupAddr Age
1 (10.100.1.254, 232.1.0.95), RP:10.251.17.41, Age:0
2 (10.100.1.254, 237.1.0.98), RP:10.251.17.41, Age:30
3 (10.100.1.254, 234.1.0.48), RP:10.251.17.41, Age:30
4 (10.100.1.254, 239.1.0.51), RP:10.251.17.41, Age:30
5 (10.100.1.254, 234.1.0.154), RP:10.251.17.41, Age:30
6 (10.100.1.254, 236.1.0.1), RP:10.251.17.41, Age:30
7 (10.100.1.254, 231.1.0.104), RP:10.251.17.41, Age:90
8 (10.100.1.254, 239.1.0.157), RP:10.251.17.41, Age:30
9 (10.100.1.254, 236.1.0.107), RP:10.251.17.41, Age:30
10 (10.100.1.254, 233.1.0.57), RP:10.251.17.41, Age:90