User Manual

Unified IP MIB Reference 123
53-1003106-01
Fan status
4
snChasExpBrdDescription
brcdIp.1.1.1.1.7
Syntax: DisplayString
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only Shows the description of the expansion board. This object can have up
to 128 characters.
snChasExpPortTotal
brcdIp.1.1.1.1.8
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only Shows the total number of ports on the expansion board.
Valid values: 1 – 24
snChasStatusLeds
brcdIp.1.1.1.1.9
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only This object is replaced by the object snAgentBrdStatusLedString.
This status LED on the front panel of a device shows the status of the
link. It is represented by one bit. There can be up to 32 bits per slot.
Status can be one of the following:
• 0 – Link off
• 1 – Link on
snChasTrafficLeds
brcdIp.1.1.1.1.10
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only This object is replaced by the object snAgentBrdTrafficLedString.
This traffic LED on the front panel of a device shows the traffic status.
It is represented by one bit. There can be up to 32 bits per slot. Status
can be one of the following:
• 0 – No traffic
• 1 – Traffic is flowing
Name, OID, and syntax Access Description