User Manual

124 Unified IP MIB Reference
53-1003106-01
Fan status
4
snChasMediaLeds
brcdIp.1.1.1.1.11
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-only This object is replaced by the object snAgentBrdMediaLedString.
It is represented by one bit. There can be up to 32 bits per slot. Status
can be one of the following:
0 – Half-duplex
1 – Full-duplex
snChasEnablePwrSupplyTr
ap
brcdIp.1.1.1.1.12
Syntax: Integer
Read-write Indicates if the SNMP agent process has been enabled to generate
power supply failure traps:
disabled(0)
enabled(1)
Default: enabled(1)
snChasMainBrdId
brcdIp.1.1.1.1.13
Syntax: OCTET STRING
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
XMR, Brocade
NetIron MLX,
Brocade NetIron
CES, Brocade
NetIron CER series
and on the FastIron
devices.
Read-only Applies to all stackable products. It identifies the main board. This is
an encoded octet string. Each octet provides the following information:
Octet 0 – Identifies the format of this octet string.
Octets 1 and 2:
If Octet 0 has a value of 1, then:
Octet 1 – Product type:
FIWG – 0x57
FIBB – 0x42
FIMLS – 0x4D
NI – 0x4E
TI – 0x54
TIRT – 0x52
Octet 2 – Board type:
POWERPC – 1
ALPHA – 2
The length of the octet string is 27.
If Octet 0 has a value of 2, then:
Octet 1 – Product type:
BI_WG – 0x57
BI_BB – 0x42
BI_NI – 0x4E
NI_M4 – 0x4D
BI_SLB – 0x53
Octet 2 – Module type:
MASTER_FIBER_8G – 0x0
MASTER_FIBER_4G – 0x1
MASTER_COPPER_16 – 0x2
FI_MASTER_FIBER_2G – 0x4
FI_MASTER_FIBER_4G – 0x5
MASTER_COPPER_8G – 0x6
FI_MASTER_FIBER_8G – 0x7
Name, OID, and syntax Access Description