User Manual

Unified IP MIB Reference 129
53-1003106-01
Flash card
4
snChasArchitectureType
brcdIp.1.1.1.1.25
Syntax: Integer
Read-only Shows the architecture type:
• stackable(1) - old stackable
• bigIron(2)
• terathon(3)
• fifthGen(4)
snChasProductType
brcdIp.1.1.1.1.26
Syntax: Integer
Read-only Shows the product type. The following shows the meaning of each bit:
• invalid(0)
• BigIron MG8(1)
• NetIron 40G(2)
• NetIron IMR 640(3)
• BigIron RX 800(4)
• Brocade NetIron XMR router 16000(5)
• BigIron RX 400(6)
• Brocade NetIron XMR router 8000(7)
• BigIron RX 200(8)
• Brocade NetIron XMR router 4000(9)
• Brocade MLX router-32(13)
• Brocade NetIron XMR router 32000(14)
• BigIron RX-32(15)
• niCES2000Series(16)
• niCER2000Series(17)
• brMlxESlot4(18) - This value is supported only on the Brocade
NetIron devices.
• brMlxESlot8(19) - This value is supported only on the Brocade
NetIron devices.
• brMlxESlot16(20) - This value is supported only on the
BrocadeNetIron devices.
• brMlxESlot32(21) - This value is supported only on the Brocade
NetIron devices.
snChasSystemMode
brcdIp.1.1.1.1.27
Syntax: Integer
NOTE: This object is not
supported on the
Brocade FastIron
devices.
Read-only This object displays the mode of the Brocade MLXe, Brocade NetIron
XMR, or Brocade NetIron MLX device. It returns one of the following
values:
• xmr(1)
• mlx(2)
Values are returned as follows:
• If snChasProductType is niXmr4000, niXmr8000, niXmr160000,
or niXmr32000, then this object returns xmr(1).
• if snChasProductType is niMlx4, niMlx8, niMlx16, or niMlx32 then
this object returns mlx(2).
• If snChasProductType is brMlxE4, brMlxE8, brMlxE16, or
brMlxE32 this object returns either xmr(1) or mlx(2) depending
on the mode of the system.
Name, OID, and syntax Access Description