User Manual

140 Unified IP MIB Reference
53-1003106-01
Image and configuration file download and upload
5
snAgCfgLoad
(continued)
The following values may be read:
• normal(1)
• flashPrepareReadFailure(2)
• flashReadError(3)
• flashPrepareWriteFailure(4)
• flashWriteError(5)
• tftpTimeoutError(6)
• tftpOutOfBufferSpace(7)
• tftpBusy(8)
• tftpRemoteOtherErrors(9)
• tftpRemoteNoFile(10)
• tftpRemoteBadAccess(11)
• tftpRemoteDiskFull(12)
• tftpRemoteBadOperation(13)
• tftpRemoteBadId(14)
• tftpRemoteFileExists(15)
• tftpRemoteNoUser(16)
• operationError(17)
• loading(18)
• tftpWrongFileType(29)
• operationDoneWithNMS(28)
• tftpWrongFileType(29)
• downloadToDramFromServerOverwrite(30)
The objects “snAgCfgFname” and “snAgTftpServerIp” are required to
allow the download or upload process to occur.
No write requests is allowed while a download or upload process is in
progress.
The snAgCfgEosTable objects must be sent along in one PDU for
network management systems to recognize values from (24) to (27).
A separate write memory using the CLI or an SNMP “set
snAgWriteNVRAM” is required to save the configuration to NVRAM.
This object requires a password to be set for the snAgGblPassword
object.
NOTE: The snAgTftpServerIp object is deprecated by the
snAgTftpServerAddrType object and the snAgTftpServerAddr
object supports both IPv4 and IPv6.
snAgTftpServerAddrType
brcdIp.1.1.2.1.65
Syntax: IpAddress
Read-write Shows the TFTP server IP address type. The supported address types
are ipv4(1) and ipv6(2). The default address type is ipv4(1).
Name, OID, and syntax Access Description