User Manual
148 Unified IP MIB Reference
53-1003106-01
Image version
5
snAgSoftwareFeature
brcdIp.1.1.2.1.41
Syntax: OCTET STRING
Read-only Contains a bit string representing the software feature of the running
software image. Each bit can have one of the following values:
• 0 – The feature is not available
• 1 – The feature is available
Bit 0 is the least significant bit of an octet, and bit 7 is the most
significant bit of an octet:
• Octet 0, bit 0 – RMON
• Octet 0, bit 1 – IPX switching
• Octet 0, bit 2 – Server Load Balancing
• Octet 0, bit 3 – Layer 3 filter in switch
• Octet 0, bit 4 – IPX routing
• Octet 0, bit 5 – AppleTalk routing
• Octet 0, bit 6 – IP multicast routing
• Octet 0, bit 7 – Local access control
• Octet 1, bit 0 – BGP routing
• Octet 1, bit 1 – Loopback interface
• Octet 1, bit 2 – BigIron multi-management module
• Octet 1, bit 3 – BigIron SYSIF II
• Octet 1, bit 4 – BigIron POS support
• Octet 1, bit 5 – AppleTalk cable VLAN
• Octet 1, bit 6 – 64 subnet
• Octet 1, bit 7 – multi-slot trunk
• Octet 2, bit 0 – TACACS
• Octet 2, bit 1 – Gigabit Ethernet port auto-negotiation mode
• Octet 2, bit 2 – FSRP
• Octet 2, bit 3 – Exodus requested OSPF enhancement
• Octet 2, bit 4 – OSPF NSSA
• Octet 2, bit 5 – POS
• Octet 2, bit 6 – QoS
• Octet 2, bit 7 – Single Span
• Octet 3, bit 0 – Fast Span
• Octet 3, bit 1 – Base Layer 3
• Octet 3, bit 2 – Static log buffer
• Octet 3, bit 3 – Layer 2 POS
• Octet 3, bit 4 – BI15K
• Octet 3, bit 5 – Layer 2 ATM
• Octet 3, bit 6 – ATM
• Octet 3, bit 7 – NETFLOW
Name, OID, and syntax Access Description