User Manual

Unified IP MIB Reference 173
53-1003106-01
Configured module table
6
snAgentConfigModuleR
owStatus
brcdIp.1.1.2.8.1.1.3
Syntax: Integer
Read-write To create or delete a configured module table entry:
• other(1)
• valid(2)
• delete(3)
• create(4)
snAgentConfigModuleD
escription
brcdIp.1.1.2.8.1.1.4
Syntax: DisplayString
Read-only The description of the configured module.
snAgentConfigModuleO
perStatus
brcdIp.1.1.2.8.1.1.5
Syntax: DisplayString
Read-only The module operational status. A blank indicates that the physical
module has not been inserted in the chassis.
snAgentConfigModuleS
erialNumber
brcdIp.1.1.2.8.1.1.6
Syntax: DisplayString
NOTE: This object is
not supported
for Brocade
NetIron XMR,
Brocade NetIron
MLX, and
Brocade MLXe.
Use the
snAgentBrdSeri
alNumber in the
snAgentBrdTabl
e instead.
Read-only The module serial number. A blank indicates that the serial number has
not been programmed in the module’s EEPROM or the serial number is
not supported in the module.
This object returns the device serial number.
snAgentConfigModuleN
umberOfPorts
brcdIp.1.1.2.8.1.1.7
Syntax: Integer32
Read-only The number of ports in the module.
snAgentConfigModule
MgmtModuleType
brcdIp.1.1.2.8.1.1.8
Syntax: Integer
Read-only The management module types:
• other(1)
• nonManagementModule(2)
• unknownManagementModule(3)
• m1ManagementModule(4)
• m2ManagementModule(5)
• m3ManagementModule(6)
• m4ManagementModule(7)
• m5ManagementModule(8)
• jetcoreStackManagementModule(9)
• muchoManagementModule(10)
• rottWeilerManagementModule(11)
• fgsStackManagementModule(13)
snAgentConfigModuleN
umberOfCpus
brcdIp.1.1.2.8.1.1.9
Syntax: Integer32
Read-only The number of CPUs in the module.
Name, OID, and syntax Access Description