User Manual

Unified IP MIB Reference 185
53-1003106-01
Chapter
7
Switch Group Configuration
In this chapter
•Switch group configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
•Fabric drop count statistics table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Switch group configuration
The switch group configuration table is supported on the FastIron devices.
Name, OID, and syntax Access Description
snSwGroupOperMode
brcdIp.1.1.3.1.1
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-write Indicates if switch ports have VLANs defined:
• noVLan(1) – All switch ports with no port VLANs and no tag
assigned.
• vlanByPort(2) – All switch ports with basic port-based VLANs.
snSwGroupIpL3SwMode
brcdIp.1.1.3.1.2
Syntax: Integer
Read-write Indicates if the Layer 3 IP switch is enabled for the switch group:
• disabled(0)
• enabled(1)
snSwGroupIpMcastMode
brcdIp.1.1.3.1.3
Syntax: Integer
Read-write Indicates if the IP multicast pruning mode is enabled for the switch
group:
• disabled(0)
• enabled(1)
snSwGroupDefaultCfgMode
brcdIp.1.1.3.1.4
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, and Brocade
NetIron CER series
devices.
Read-write Indicates if the switch group contains a default configuration. If the
default configuration is overwritten, the state will change to
non-default:
• default(1) – Has a default configuration.
• nonDefault(2) – Has a non-default configuration.