User Manual

Unified IP MIB Reference 195
53-1003106-01
Chapter
8
Switch Port Information Group
In this chapter
•Switch port information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Switch port information
The following table contains information about the switch port groups.
The snSwIfInfoTable, which is indexed by ifIndex port format, replaces the snSwPortInfoTable,
which is indexed by a proprietary port format.
NOTE
The objects snSwIfStatsInFrames through snSwIfStatsOutKiloBitsPerSec use common application
programming interface (API) for LP port statistics.
Name, OID, and syntax Access Description
snSwIfInfoTable
brcdIp.1.1.3.3.5
None The switch port information table.
snSwIfInfoPortNum
brcdIp.1.1.3.3.5.1.1
Syntax: InterfaceIndex
Read-only Shows the port or interface index.
snSwIfInfoMonitorMode
brcdIp.1.1.3.3.5.1.2
Syntax: Integer
Read-write
• On the Brocade FastIron platforms, this object is deprecated by
snSwIfInfoMirrorMode object and snPortMonitorTable.
• On the Brocade NetIron platforms, this object is deprecated by
snPortMonitorTable.
snSwIfInfoMirrorPorts
brcdIp.1.1.3.3.5.1.3
Syntax: Integer
Read-write Contains a list of port or interface indexes (ifindex) that mirror this
interface when monitoring is enabled.
snSwIfInfoTagMode
brcdIp.1.1.3.3.5.1.4
Syntax: Integer
Read-write Indicates if the port has an 802.1q tag:
• tagged(1) – Ports can have multiple VLAN IDs because these ports
can be members of more than one VLAN.
• untagged(2) – There is only one VLAN ID per port.
• dual(3) - Dual mode is associated with a VLAN ID snSwIfVlanId; dual
mode with snSwIfVlanId zero disables the dual mode.
snSwIfInfoTagType
brcdIp.1.1.3.3.5.1.5
Syntax: Integer32
Read-write Indicates the IEEE802.1q tag type of an interface. The tag type is
embedded in the two octets in the length or type field of an Ethernet
packet. It specifies that the two octets after the length or type field in an
Ethernet packet is the tag value.
Default value: 33024