User Manual

212 Unified IP MIB Reference
53-1003106-01
ifIndex to interface ID lookup table
9
ifIndex to interface ID lookup table
The ifIndex to interface ID lookup table maps ifindex values to the interface ID lookup table. If the
table provides an ifIndex, this table returns the interface ID value.
snInterfaceLookupInterfaceId
(continued)
• 9 – ATM PVC
• 10 – Management
• 11 – Trunk
• 12 – IP Tunnel (for IP tunnels, except MPLS)
This value also applies to 6 - 4 tunnels in the Brocade NetIron
XMR, Brocade NetIron MLX, and to Brocade MLXe devices.
Octet 1
• If the value of Octet 0 is 1, 2, 3, 7, or 9, then this octet shows
the slot number of the device.
• If the value of Octet 0 is 6 or 8, then this octet shows the
tunnel ID.
• If the value of Octet 0 is 5, then this octet shows the loopback
ID.
• If the value of Octet 0 is 4, then this octet shows a virtual ID.
Octet 2 – If the value of Octet 0 is 1, 2, 3, 7, or 9, then this octet
shows the port number.
Octet 3 – If the value of Octet 0 is 7 or 9, then this octet shows the
ATM Subif number.
Octet 4 – If the value of Octet 0 is 9, then this octet shows the ATM
VPI number.
Octet 5 – If the value of Octet 0 is 9, then this octet shows the ATM
VCI number.
snInterfaceLookupIfIndex
brcdIp.1.1.3.3.3.1.2
Syntax: Integer32
Read-only Shows the interface in the ifIndex format.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snIfIndexLookupTable
brcdIp.1.1.3.3.4
None The ifIndex to interface ID lookup table.
snIfIndexLookupIfIndex
brcdIp.1.1.3.3.4.1.1
Syntax: Integer32
Read-only Shows the interface in the ifIndex format.